Sep 13, 2012 | Ruger 10/22 Projects
LIGHTWEIGHT SILENCED 10/22 PROJECT
LIGHTWEIGHT SILENCED 10/22
After being utterly thrilled with how our first 10/22 project turned out, I decided it was time to start a new project that is 180 degrees different than our BENCHREST TACK DRIVER. This time around, I am targeting size, weight, and noise.
Presently, I’m considering a 10/22 based on action and receiver parts from the following companies.
Once I accumulate the hardware, I will update this post and layout a page similar to the previous 10/22 project. I will also monitor advertised weights versus the actual weights. Stay tuned.
Feb 5, 2011 | Ruger 10/22 Barrels, Ruger 10/22 tools
ACCUTEC RUGER 10/22 BARREL PUSHER
ACCUTEC RUGER 10/22 BARREL PUSHER
The AccuTec 10/22® Barrel Pusher is designed to easily remove factory and aftermarket barrels from the receivers of Ruger® 10/22® rifles.
The 10/22® Barrel Pusher works with all available calibers including 17HMR, 17HM2, 22LR and 22WMR. The tool removes the tightest barrel with no exertion and with no danger of marring or scratching the receiver. Any mounted scope or other optic may remain in place. The Barrel Pusher allows easy barrel removal anywhere in your home or apartment without the need of a bench-mounted vice.
Installation on a field stripped receiver literally takes seconds.
It appears to only be available at Brownells at this time.
Jan 14, 2011 | Ruger 10/22 Barrels
Lightweight, aluminum replacement for factory barrel gives you the advantages of a short barrel, while the permanently attached muzzle shroud keeps the barrel length legal—no NFA transfer paperwork to worry about. Your flash suppressor with standard ½”-28 threads actually screws to the barrel inside the shroud, so it adds nothing to the barrel’s 16½” overall length. Machined from billet aluminum, with a .920″ O.D. and a chrome-moly steel bore liner to provide the rigidity and heat-transfer benefits of a bull barrel without the weight penalty. Oversized shank helps ensure a secure fit to almost any 10/22 receiver.
SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Chrome-moly steel liner with 1-16″ twist rifling. 16½” (42cm ) O.A.L. including shroud, 12¼” (31.1cm) bore length, .920″ (2.3cm) O.D. Accepts muzzle accessories with ½”-28 tpi threads. Installation instructions included.
Sep 26, 2010 | Ruger 10/22 Barrels
I have an ER Shaw in one of my AR-15 and it’s a good shooter. I was unaware they produced Ruger 10/22 Barrels
Check out the technical specifications here at Brownells
E.R.Shaw Ruger 10/22 Barrels
Sep 23, 2010 | Ruger 10/22 Barrels
Drop in stainless steel barrel features match bore and chamber dimensions. The barrels will vary no more than +/-.0001″ from breech to muzzle. Each barrel is digitally measured to assure exact tolerances. The barrel features our unique chamber designed for optimum accuracy and functioning. A 32-hole compensator is also installed which allows for recoil free shooting. The compensator also stabilizes gases around the bullet upon exiting the muzzle for increased accuracy. In addition, the barrel features six longitudinal flutes that provide more surface area for heat dissipation, reduce weight and increase barrel rigidity for increased accuracy. 20″ overall length, .925″ bull barrel, weighs approx 3lb 1oz
The top 2 shooters at the 2005 ARA (American Rimfire Association) Nationals were shooting Shilen barrels. Here’s what Shilen states about their barrels.
Well, here are the barrels that are up to the job! Each one of these Shilen target barrels must meet our Match Grade criteria, air gauging within 0.0005″ of a special undersized groove diameter designed to produce optimum accuracy from all types of .22 ammunition. The bore also must not vary in diameter more than 0.0003″ for its entire length. These are serious barrels for serious shooters.
In addition, the barrels are stress relieved and warranted by Shilen against defects in materials and workmanship. Offered in both Chrome-moly and Stainless Steel, they are completely finished by Shilen and are ready for installation. Chrome-moly barrels are supplied blued. Stainless steel barrels come in polished white, with a hand-lapped bore.
(Sorry for the poor image. If someone has a better one pass it along)
These are machined from top of the line Lothar-Walther barrel blanks.
the ultimate in appearance and performance, our FINNED RUGER 10/22 BARREL is the perfect match to dress up your rifle. The barrel is professionally CNC machined to provide deep cooling grooves from the receiver to the barrel band for an appearance that is similar to a Thompson or a Reising machine gun. No other upgrade for your 10/22 looks as good and is as functional as this FINNED barrel. To make it even better, this factory taper replacement barrel is professionally CNC threaded 1/2×28 TPI and comes with the thread protector. The barrels are perfect for any 1/2×28 threaded suppressor or accessory.
The barrels are 4140 series US Certified steel and are polish blued finish. The blanks are made by a well known barrel maker that supplies barrels to many popular firearm manufacturers. The barrels are 1:16″ twist, which is perfect for standard or high velocity ammo. The barrels do not have any iron sights installed and are designed to be used with a receiver mounted scope or similar optics. Installation is fast and easy with no modifications to your rifle. Simply remove the stock, unscrew the 2 cap screws that hold the barrel in, remove your factory barrel and install this new one.
Tactical Innovations offers 10/22 barrels threaded for your favorite supressor or as a barrel and supressor kit. Unfortunately there is not many pictures available.
Drop-in, .22 LR target barrel features a premium, button-rifled, chrome moly liner installed in a lightweight aluminum shell to achieve match grade accuracy and reduced weight. Deep, CNC machined flutes help keep barrel weight to 1 lb, plus increase rigidity and overall surface area for improved heat dissipation. Hardcoat anodized surface delivers added strength and abrasion resistance. Versatile, 1:16 twist rifling stabilizes a wide variety of hunting and match ammunition. Installation may require alteration to factory stock. Standard models feature a .920″ diameter, straight bull barrel. Available in gloss or matte, black finish. Threaded model features the same .920″ diameter barrel as the Standard model, plus has a threaded muzzle for attaching flash hiders or compensators. Includes streamlined cap to protect threads when not in use. Matte black finish.
SPECS: Barrel Shell – Aircraft grade aluminum, anodized, black, gloss or matte finish. Non-tapered, bull bbl. contour. Liner – Chrome moly, .22 LR, 1-16″ twist. 16 1/2″(41.9cm) long x .920″ (2.34cm) O.D. 1 lb. (.45 kg) wt. Fits Ruger 10/22, .22 LR receivers only. 1/2″-28 tpi male threads, 3/8″ long
Yankee Hill Machine offers 16″ 10/22 barrels threaded 1/2-28 for your favorite sound supressor match chambered for .22 LR, 1:16” twist . The 10/22 barrels are available in stainless and plated.