Ruger 10 22 BX Trigger With Target Barrel
Ruger 10 22 BX Trigger With Target Barrel
Ruger 10 22 BX Trigger With Target Barrel – The Brownells 10/22® BX-Trigger® features a light, crisp 2.5-3.0 lb trigger pull, with minimal over travel. Rugged, reliable and safe (meets or exceeds industry standards for drop testing), this new and improved Genuine Ruger® Factory Accessory comes in a completely self-contained module and is easy to install. The BX-Trigger® features a Polymer construction and drop-in installation. Fits Ruger® 10/22® rifles or 22 Charger Pistol.
Paired with a heavy contour, premium-grade “Bentz” chambered .22 LR barrel provides an immediate improvement in accuracy over your original factory barrel. Close-tolerance Bentz chamber combines the accuracy of a match grade chamber with the reliable cycling of a standard factory chamber. Extra-heavy, untapered .920″ O.D. provides maximum stability for greater shot-to-shot consistency. Use with standard or match grade ammunition; not for use with CCI Stinger ammunition. Minor fitting to stock may be required.
Slide Fire 1022 Stock SSAR-22
Leave it to the Slide Fire team to take the incredibly fun to shoot and accurate Ruger 10/22 and make it even more fun with their Slide Fire 1022 Buttstock ! I don’t even need to explain how cool this is. I smell the birth of a new site project. If you aren’t sure why you need the slide fire click the link below and be enlightened.
Slide Fire 1022 Butttock SSAR-22
Outfit your Ruger®10/22® for the ultimate rapid fire experience with the SSAR-22 Kit. It includes an SSAR-15® OGR stock, 3lb pull trigger, and Tactical-22 chassis. The 3lb Trigger is optimized for rapid fire action and the 10/22® chassis system is designed to enhance the functionality and aesthetics of a standard RUGER 10/22® rifle. This is more than an addition, it’s a complete overhaul on your rifle.
The Slide Fire 1022 Buttttock SSAR-22 utilizes the same groundbreaking design and technology as the SSAR-15 line of stocks, offering the same level of performance, reliability, and superior craftsmanship for the classic 10/22 rifle. The SSAR-22 allows the shooter to safely bump fire their 10/22 rifle from the shoulder, effectively and legally simulating fully automatic fire, and allowing for an unprecedented measure of control that is severely lacking when attempting to bump fire a rifle in the traditional, “from-the-hip” manner.
The SSAR-22 features a shelf that positions the shooter’s index finger in a fixed position in front of the rifle’s trigger. To fire, the rifle is moved forward with the support hand pushing on the forend, thereby bringing the trigger to the shooter’s finger and discharging a round. The rifle’s recoil causes it to move rearward, allowing the trigger mechanism to reset. When the right amount of constant forward pressure is applied, the rifle will continue to fire as the trigger is brought forward and depressed by the shooter’s stationary index finger, causing the gun to Bump Fire. Only 4-6 lbs. of force is required, allowing shooters of any stature to enjoy the fast paced fun of the Slide Fire 10/22. With a little practice, the shooter will be capable of delivering accurate single shots, bursts, or even full magazine dumps on demand using the SSAR-22.
The SSAR-22 employs a simple stock locking mechanism that allows shooters to select between their preferred firing methods easily and quickly. In the extended or “Open” position, the rifle’s receiver is allowed to freely slide rearward during the recoil impulse into the stock, thereby allowing the gun to be bump fired. The stock may also be locked into a collapsed, or “Closed,” position into which the buffer tube attached to the chassis is held in place within the buttstock and unable to move, thereby facilitating semi-auto function.
The SSAR-22 is designed to be compatible with the Ruger 10/22 and clones. SSAR-22 Kit includes the chassis system platform, match grade trigger assembly, SBS stock, handguard with flattop rail for optic or sight mounting, interface block, nut retainer, hex key, mounting hardware, instructions, BATFE Approval Letter, and a lifetime factory warranty. Also included is an A2 pistol grip and collapsible, M4 buttstock for converting the 10/22 to a standard M4 configuration if extended semi-auto operation is desired. Made in the USA.
- Model: SSAR-22
- Stock Material: Reinforced High Strength Polymer
- Compatibility: Ruger 10/22
NOTE: The Left Hand Model has a fixed finger shelf located on the right side of the stock. The trigger will be blocked by this shelf and inaccessible when fired with the right hand.
Slide Fire 1022 Buttstock SSAR-22
Ruger 10/22 Hunter X-22 Stock-Magpul
Magpul has really hit the ground in 2015 with products for the AR15, Remington 700, Glock Pistols, Ak47 and of course our much loved Ruger 10/22. The Magpul Ruger 10/22 entry comes in the for of a 2.4 pound stock called the Ruger 10/22 Hunter X-22 Stock. The Magpul Ruger 10/22 Hunter X-22 Stock is available in five colors, black, stealth gray, flat dark earth, olive drab and foliage green. The Ruger 10/22 Hunter X-22 Stock has a reversible insert that allows for standard or bull barrels.
The Magpul Hunter X-22 chassis is an ergonomic, full-featured stock for the ubiquitous Ruger 10/22 rifle. Made from high quality reinforced polymer, the Hunter X-22 features an ergonomic grip, adjustable length of pull and comb height to fit a wide variety of shooters, multiple sling mounting options, a non-slip rubber butt pad, and M-LOK slots for accessory attachment. The Hunter X-22 fits standard Ruger 10/22 .22 LR pattern rifles with no gunsmithing, and a reversible barrel tray ensures proper fit with factory pencil profile as well as heavy bull barrels. The Ruger 10/22 Hunter X-22 Stock is available for pre-order now
Ruger 10/22 Hunter X-22 Stock Features
- Drop-in design compatible with all factory Ruger 10/22 .22 LR receivers
- Reinforced polymer construction for strength and durability
- 60 degree grip angle from bore axis
- Adjustable LOP from 12.5”-14.5” with 0.50” Spacers
- Non-slip rubber butt-pad
- Optional Cheek Riser Kits to raise cheek height 0.25”, 0.50”, or 0.75”
- Reversible barrel tray accepts all factory barrels as well as aftermarket up to 0.920”
- Compatible with all capacities of factory Ruger 10/22 magazines
- M-LOK™ slots on forend sides and bottom for a wide variety of accessory and sling mounting options
- Two dimpled drill points to install optional standard swivel studs
- Push-button QD swivel compatibility in rear with optional Sling Mount Kits
- Left and Right 1-1/4” Footman’s Loops
- Made in U.S.A.
Ruger 10/22 Magazine Doubler
TandemKross Ruger 10/22 Ruger Mark Pistol Parts
I recently became of a company called Tandemkross that specializes in aftermarket parts for the Ruger 10/22, Ruger 22/45, Ruger Mark II Ruger Mark III and Keltec PMR Pistols. Tandemkross offers some pretty neat products. The first such product to catch my eye is the Ruger 10/22 Mag Doubler. The Ruger 10/22 Magazine Doubler connects two 10 round magazines together at the base. It is the cleanest implementation of the concept I have seen to date. For more info on Tandemkross visit their website.
- Allows 2 10/22 Rotary Magazines from Ruger to be “double” stacked
- Easy to install. Does not modify the magazines in any way
- Durable plastic design for years of service
High Tower Armory Ruger 10/22 PS90 Conversion Chassis – Flat Dark Earth
The text below is a quote from the firearmblog.
High Tower Armory Ruger 10/22 PS90 Conversion Chassis:
High Tower Armory’s innovative HTA 90/22 stock is now shipping. The stock includes everything needed to make a standard Ruger 10/22 into a P90-ish bullpup and comes in three flavors; black, olive drab, and flat dark earth. The converted 10/22 has a working charging handle and safety in the same places as a real FN P90, but the translucent “magazine” up top is a fake, simply storing spare .22 rounds for looks. You’ll need to insert a regular magazine from underneath, where the actual P90 ejects its spent casings. The HTA 90/22 ejects its empties to the right using the standard 10/22 ejection port, which you can see peeking out from the side of the stock.
Some serious problem solving went into shoehorning the world’s most popular .22LR rifle into a carbon copy of the famous P90 shape without requiring any gunsmithing at all. The quality of the stock and its fittings is very high, unlike some bullpup conversions of the past. The kit comes with a fake silencer/suppressor that mounts on the stock itself and will work with either the standard barrel or Ruger’s optional .920in heavy barrel with no modifications needed. High Tower Armory states that they have had 14 year old kids successfully follow the installation instructions (which is going to make me feel real smart if I get stuck somewhere!).
High Tower Armory Ruger 10/22 PS90 Conversion Chassis
One word of warning; to meet the overall length requirement of 26 inches and keep the 10/22 a Title 1, non-NFA rifle, you need an 18 inch barrel. Factory Rugers come with an 18.5 inch barrel, but if you’ve cut yours down to 16 inches, the HTA kit is a ticket to SBR city. The black version costs $229.99, and the olive drab and flat dark earth variants run just ten bucks more than that. Of course, you have to provide your own Ruger 10/22 for the stock to fit on. If you love the look and feel of the FN P90 but don’t want to pay the high cost of 5.7×28 ammunition just to plink with, High Tower Armory has all three colors in stock right now.
KIDD Ruger 10/22 Parts
As part of a new project I am looking at some 10/22 upgrades from a company called KIDD INNOVATIVE DESIGN. I do not know much about them or the quality of their products so I am looking for some feedback for a KIDD 10/22 based project. Feel free to reply below.
I ordered the HARRIS BIPOD HBRMS 6″-9″ on Sunday and it arrived on Wednesday. You cant beat that for service. I also ordered the #6 sling stud adapter at the the same time I placed the bipod order. This adapter allows you to install the sling stud in the Bell&Carlson stock T-Slot channel.
I has one reservation going in and that was whether or not the 6″-9″ was the correct working range for the bipod. I can now say it was in fact the correct choice. Ill get some pictures this weekend of the 10 22 with the bipod in place.
POWER CUSTOM RUGER 10/22 HAMMER & SEAR PACKAGE
The POWER CUSTOM RUGER 10/22 HAMMER & SEAR PACKAGE Drop in kit that produces a 2 3/4 LBS. Trigger pull. These are the highest quality parts on the market. EDM produced. Includes an Extra Power Hammer Spring, Extra Power Disconnector Spring, Replacement Trigger Return Spring, 2 Hammer Shims, & 2 Trigger Shims. Choose from Adjustable or Non Adjustable Versions. You can Adjust the pretravel out of the Adjustable ones without any problem. You have to remove the sear out of the gun to adjust it but once it is adjusted you can locktight the screw with red locktight and it will hold with out any problems.