Ruger 10 22 BX Trigger With Target Barrel

Ruger 10/22 BX Trigger With Target Barrel

Ruger 10 22 BX Trigger With Target Barrel

Ruger 10 22 BX Trigger With Target Barrel

Ruger 10 22 BX Trigger With Target Barrel – The Brownells 10/22® BX-Trigger® features a light, crisp 2.5-3.0 lb trigger pull, with minimal over travel. Rugged, reliable and safe (meets or exceeds industry standards for drop testing), this new and improved Genuine Ruger® Factory Accessory comes in a completely self-contained module and is easy to install. The BX-Trigger® features a Polymer construction and drop-in installation. Fits Ruger® 10/22® rifles or 22 Charger Pistol.

Paired with a heavy contour, premium-grade “Bentz” chambered .22 LR barrel provides an immediate improvement in accuracy over your original factory barrel. Close-tolerance Bentz chamber combines the accuracy of a match grade chamber with the reliable cycling of a standard factory chamber. Extra-heavy, untapered .920″ O.D. provides maximum stability for greater shot-to-shot consistency. Use with standard or match grade ammunition; not for use with CCI Stinger ammunition. Minor fitting to stock may be required.

Ruger 10-22 BX Trigger

 

Ruger 10-22 BX Trigger

Ruger 10-22 BX Trigger

Ruger 10-22 BX Trigger – I find it pretty interesting that Ruger has finally decided to begin cashing in on the aftermarket parts for their very own Ruger 10/22. All I can say is it’s about time Ruger! While have not yet seen or experienced the Ruger 10-22 BX Trigger it seems to get glowing reviews at both Cabelas and Brownells

The Ruger 10 22 BX-Trigger™: a light, crisp, “drop-in” replacement trigger assembly that is compatible with all Ruger® 10/22® rifles and 22 Charger™ pistols. The BX-Trigger™ is a Genuine Ruger Factory Accessory and is the perfect upgrade for all 10/22® rifles and 22 Charger™ pistol models because of the significantly reduced pull weight of approximately 2.75 pounds (versus 6 pounds on the standard 10/22® trigger). The BX-Trigger™ is sold as a complete assembly that drops in to replace the existing trigger assembly. A video of the installation process can be found at Ruger.com/BX-Trigger

Improve the trigger pull on your Ruger 10/22 or 22 Charger™ pistol with the BX-Trigger. Light, crisp Genuine Ruger Factory Accessory breaks between 2.5 and 3 lbs. (approximately half the force needed with the factory trigger) plus has minimal overtravel and a positive reset. Rugged design delivers reliable, safe operation that exceeds industry standard for drop testing. Self-contained module is easy to install.

Ruger 10-22 BX Trigger


Ruger 10/22 Trigger Upgrades

Ruger 10/22 Triggers

There’s several good Ruger 10/22 Trigger Upgrades. Unfortunately most of them cost as much or possibly even more then the initial purchase price of the gun. In addition to the drop-in triggers listed below there’s numerous manufactures that offer upgrade parts for the existing 10/22 trigger for a more economical solution. To get an idea of what’s involved with that check out this page from Brownells.

Visit Brownells to support this web site Shop Brownells.com!

Timney Triggers

Timney Triggers 10/22 Drop-In Assembly

Timney Triggers 10/22 Drop-In Assembly

Timney Triggers 10/22 Drop-In Assembly

Timney Triggers’ 10/22 Drop-In Assembly contains a complete trigger assembly, cross-bolt safety, bolt catch and magazine release. The automatic bolt release allows the user to simply pull and release the charging handle to unlock the bolt, with or without the magazine inserted, and the magazine release extends from the front of the assembly to the underside of the trigger guard.

The steel trigger, sear and hammer are wire-EDM cut and heat-treated for durability. The housing is CNC-machined 6061-T6 aluminum and fits into any standard 10/22 stock. For installation, simply remove the two receiver cross pins, remove the old assembly, insert the Drop-In and then reinsert the cross pins. Trigger-pull weight is factory-set at 2 pounds, 12 ounces, with no discernible creep

 

Timney Triggers has just started accepting preorders of their new drop-in trigger for the Ruger 10-22. “EDM cut, Teflon-Nickel coated, exceptionally smooth, crisp, single-stage, drop-in trigger. Pull weight 2.5 pounds.

Ruger 10/22 2.5 Pound Timney Trigger

KID Ruger 10/22 Two-stage Trigger

The KID trigger offers the incredibly clean and consistent let off expected in a target trigger while maintaining the total reliability and safety required of a field trigger. The pull weight can be infinitely distributed between the two stages offering a pull as light as 6 ounces (3 ounces on the first stage and 6 ounces on the second stage) or as heavy as 2.5 pounds.

KID Two-stage Trigger for the ruger 10/22

Volquartsen Trigger Guard 2000

This complete Trigger Assembly is CNC machined from aircraft aluminum and equipped with precision EDM parts. It features an internal pre-travel adjustment and a hammer that is precision ground from 440C stainless steel and hardened to 58 RC. The sear and disconnector are made of A2 hardened tool steel with tolerances of +/- .0002″, complete with custom tuned springs. The trigger is black anodized, equipped with an over travel adjustment screw and is reset internally to eliminate any dragging or inconsistencies caused by a conventional trigger plunger. An automatic bolt release and an extended magazine release are also included. Trigger pull is pre-set to 2 to 2-1/2 lbs. Due to the oversized safety used, it may be necessary for some stocks to be modified slightly to accommodate this part.

Volquartson Trigger Guard 2000

Jard Ruger 10/22 Trigger

Machined, aluminum, trigger housing with hardened, steel components replaces the non-adjustable, factory trigger in your Ruger 10/22 for a crisp, consistent, single stage trigger pull worthy of the finest match rifle. Patented, two-lever system puts the sear engagement point at the backside of the hammer for improved leverage that lightens pull weight to approximately 1.5 or 2.5 pounds, depending on model. Extra-power hammer spring ensures fast, positive primer ignition. Adjustments for sear engagement and overtravel allow precise tuning to eliminate creep. Includes pivoting ejector, magazine latch, and push-button safety. Spring-loaded, bolt lock lever disengages automatically when bolt is pulled rearward for easy, one-handed bolt operation. Available in black or silver. Drop-in installation using the factory, receiver cross-pins.

Jard Ruger 10/22 Trigger System

Hornet Custom Ruger 10/22 Trigger

The best selling custom trigger assembly upgrade for your Ruger 10/22. If you have been dissatisfied with the 6-8 pound trigger pull that came with your rifle, this customized trigger assembly may be perfect for hunting & off-hand target shooting. The crisp trigger release is only 2-3/4 pounds. Each trigger assembly has been carefully fitted, lubricated, and tested for safety and reliability. What makes it special are the custom replacement parts included in the assembly. Standard trigger and housing color is black. Best application: Hunting & off-hand target shooting.

Easy drop-in installation. No special tools needed. Instructions included. After the stock is removed, two cross-pins attach the assembly to the receiver. Drift them out, drop the old assembly, and reassemble in reverse order. It can be done in less than 5 minutes without experience.

Hand polished and honed Hammer for a light, smooth, trigger release. Lightweight Trigger Return Spring and Custom Radius Trigger Return Plunger polished for smoothness. Custom Sear and Disconnector honed for minimal positive engagement consistent with safety. Automatic Bolt Release eliminating two-hand operation – just pull back and release. Custom Extended Magazine Release – push forward and the magazine easily drops away – no more convoluted pinching to operate the release. Custom hammer, sear, and disconnector pins to eliminate most of the trigger play. Satin black polymer housing, red trigger, red extended magazine release. All parts are fitted, lubricated, and test fired.

Hornet Custom Ruger 10/22 Trigger

Timney Triggers 10/22 Drop-In Assembly

Timney Triggers 10/22 Drop-In Assembly

Timney Triggers 10/22 Drop-In Assembly

 

Timney Triggers’ 10/22 Drop-In Assembly contains a complete trigger assembly, cross-bolt safety, bolt catch and magazine release. The automatic bolt release allows the user to simply pull and release the charging handle to unlock the bolt, with or without the magazine inserted, and the magazine release extends from the front of the assembly to the underside of the trigger guard.

The steel trigger, sear and hammer are wire-EDM cut and heat-treated for durability. The housing is CNC-machined 6061-T6 aluminum and fits into any standard 10/22 stock. For installation, simply remove the two receiver cross pins, remove the old assembly, insert the Drop-In and then reinsert the cross pins. Trigger-pull weight is factory-set at 2 pounds, 12 ounces, with no discernible creep. Price: $180.

POWER CUSTOM RUGER 10/22 HAMMER & SEAR PACKAGE

POWER CUSTOM RUGER 10/22 HAMMER & SEAR PACKAGE

POWER CUSTOM RUGER 10/22 HAMMER & SEAR PACKAGE

The POWER CUSTOM RUGER 10/22 HAMMER & SEAR PACKAGE Drop in kit that produces a 2 3/4 LBS. Trigger pull. These are the highest quality parts on the market. EDM produced. Includes an Extra Power Hammer Spring, Extra Power Disconnector Spring, Replacement Trigger Return Spring, 2 Hammer Shims, & 2 Trigger Shims. Choose from Adjustable or Non Adjustable Versions. You can Adjust the pretravel out of the Adjustable ones without any problem. You have to remove the sear out of the gun to adjust it but once it is adjusted you can locktight the screw with red locktight and it will hold with out any problems.