Finally got to take some pictures of the CLARK CUSTOM RUGER 10/22 BARRELED ACTION. The pictures are mostly of the receiver to show some of the details. The BELL & CARLSON ODYSSEY 10/22 STOCK should arrive Monday so progress will continue shortly.
CLARK CUSTOM RUGER 10 22 BARRELED ACTION
CLARK CUSTOM RUGER 10 22 BARRELED ACTION
CLARK CUSTOM RUGER 10 22 BARRELED ACTION
CLARK CUSTOM RUGER 10 22 BARRELED ACTION
I would have preferred an Anschutz style stock but being left handed my choices were very limited. I ended up getting a BELL & CARLSON ODYSSEY from Stocky Stocks for substantially cheaper about $100 than anywhere else. Bell & Carlson is typically a moderate quality product at half the price of it’s nearest competitor McMillan.
Bell&Carlson Ruger 10/22 Odyssey Stock
The Odyssey features a fully adjustable cheek piece and length of pull. The front to rear downward tapered forend allows for minute elevation adjustment by simply sliding the rifle. The vented forend has a rail for attachments. Fine and distinct checkering. For right-hand or left-hand shooters. Can be purchased with either 2-way or 3-way adjustable butt assembly, this is for the 2 way.
(Adjustable comb, adjustable L.O.P., no up/down butt adjustment)
POWER CUSTOM RUGER 10/22 HAMMER & SEAR PACKAGE
The POWER CUSTOM RUGER 10/22 HAMMER & SEAR PACKAGE Drop in kit that produces a 2 3/4 LBS. Trigger pull. These are the highest quality parts on the market. EDM produced. Includes an Extra Power Hammer Spring, Extra Power Disconnector Spring, Replacement Trigger Return Spring, 2 Hammer Shims, & 2 Trigger Shims. Choose from Adjustable or Non Adjustable Versions. You can Adjust the pre-travel out of the Adjustable ones without any problem. You have to remove the sear out of the gun to adjust it but once it is adjusted you can lock tight the screw with red lock tight and it will hold without any problems.
ACCUTEC RUGER 10/22 BARREL PUSHER
The AccuTec 10/22® Barrel Pusher is designed to easily remove factory and aftermarket barrels from the receivers of Ruger® 10/22® rifles.
The 10/22® Barrel Pusher works with all available calibers including 17HMR, 17HM2, 22LR and 22WMR. The tool removes the tightest barrel with no exertion and with no danger of marring or scratching the receiver. Any mounted scope or other optic may remain in place. The Barrel Pusher allows easy barrel removal anywhere in your home or apartment without the need of a bench-mounted vice.
Installation on a field stripped receiver literally takes seconds.
It appears to only be available at Brownells at this time.
A forum member of Tactical22.net posted this link.
Heres a description from the author:
It is easy to make the bolt stop on the 10/22 hold the bolt back, but it is a pain to make it let the bolt go forward again. This simple fix will make it much easier to release the bolt, just tug back and let it go!
Archangel Marauder Ruger 10/22 G36 Folding Stock
Now this looks like a clever upgrade for a Tactical Ruger 10/22
Lightweight, aluminum replacement for factory barrel gives you the advantages of a short barrel, while the permanently attached muzzle shroud keeps the barrel length legal—no NFA transfer paperwork to worry about. Your flash suppressor with standard ½”-28 threads actually screws to the barrel inside the shroud, so it adds nothing to the barrel’s 16½” overall length. Machined from billet aluminum, with a .920″ O.D. and a chrome-moly steel bore liner to provide the rigidity and heat-transfer benefits of a bull barrel without the weight penalty. Oversized shank helps ensure a secure fit to almost any 10/22 receiver.
SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Chrome-moly steel liner with 1-16″ twist rifling. 16½” (42cm ) O.A.L. including shroud, 12¼” (31.1cm) bore length, .920″ (2.3cm) O.D. Accepts muzzle accessories with ½”-28 tpi threads. Installation instructions included.
You need to lay your Ruger 10/22 on some sort of mat to protect the rifle while service it, so why not use a mat that’s also an exploded view and parts list.
Manufacturers Description:
This isn’t your ordinary gun cleaning mat! Show your pride for your weapon while using this high quality neoprene rubber backed and cloth top gun cleaning mat to protect your gun bench, desk, kitchen table, or whatever surface you usually clean or maintain your gun on. You likely keep your gun in a soft padded case or maybe a gun cabinet with a felt lined rack or something similar to protect it so why would you scratch your gun while cleaning or repairing it by setting it on a hard surface that could easily scratch your firearm?
PROTECT YOUR GUN AND WORK AREA
The soft polyester top will ensure your gun doesn’t get scratched while the neoprene rubber backing on the mat will keep everything in place and prevent your work surface from sliding around. This mat will also keep harmful chemicals, oil and dirt from penetrating down to your desk, bench or the area where you normally clean and work on your firearms. After the mat begins to accumulate too much dirt, chemicals, or oil just throw it in the wash on a gentle cycle, allow to air dry and it will be virtually like new.
ENTERTAINING AND EDUCATIONAL
With the exploded view drawings and accompanying parts list, making repairs, disassembling your firearm, or basic cleaning can be done much faster and with greater enjoyment. Guns are extremely fascinating and the drawings and data that is printed on each mat will keep you entertained while educating you on how your firearm operates.
DIMENSION
This gun cleaning and parts mat measures 12 inches by 36 inches and is 1/8 of an inch thick.
PRODUCT DETAILS
This is made specifically for the Ruger 10/22 standard models but will also be very similar to all of the Ruger 10/22 varients as well as other rifles that take the .22 lr cartridge and are similar in design to the Ruger 10/22.
