AR15 Builder

Police Store

Ruger 10 22 BX Trigger With Target Barrel

Ruger 10/22 BX Trigger With Target Barrel

Ruger 10 22 BX Trigger With Target Barrel

Ruger 10 22 BX Trigger With Target Barrel

Ruger 10 22 BX Trigger With Target Barrel – The Brownells 10/22® BX-Trigger® features a light, crisp 2.5-3.0 lb trigger pull, with minimal over travel. Rugged, reliable and safe (meets or exceeds industry standards for drop testing), this new and improved Genuine Ruger® Factory Accessory comes in a completely self-contained module and is easy to install. The BX-Trigger® features a Polymer construction and drop-in installation. Fits Ruger® 10/22® rifles or 22 Charger Pistol.

Paired with a heavy contour, premium-grade “Bentz” chambered .22 LR barrel provides an immediate improvement in accuracy over your original factory barrel. Close-tolerance Bentz chamber combines the accuracy of a match grade chamber with the reliable cycling of a standard factory chamber. Extra-heavy, untapered .920″ O.D. provides maximum stability for greater shot-to-shot consistency. Use with standard or match grade ammunition; not for use with CCI Stinger ammunition. Minor fitting to stock may be required.

Slide Fire 1022 Buttstock

Slide Fire 1022 Stock SSAR-22

Slide Fire 1022 Stock SSAR-22

Leave it to the Slide Fire team to take the incredibly fun to shoot and accurate Ruger 10/22 and make it even more fun with their Slide Fire 1022 Buttstock ! I don’t even need to explain how cool this is. I smell the birth of a new site project. If you aren’t sure why you need the slide fire click the link below and be enlightened.

Slide Fire 1022 Butttock SSAR-22 Video

Slide Fire 1022 Butttock SSAR-22

Outfit your Ruger®10/22® for the ultimate rapid fire experience with the SSAR-22 Kit. It includes an SSAR-15® OGR stock, 3lb pull trigger, and Tactical-22™ chassis. The 3lb Trigger is optimized for rapid fire action and the 10/22® chassis system is designed to enhance the functionality and aesthetics of a standard RUGER 10/22® rifle. This is more than an addition, it’s a complete overhaul on your rifle.

The Slide Fire 1022 Buttttock SSAR-22 utilizes the same groundbreaking design and technology as the SSAR-15 line of stocks, offering the same level of performance, reliability, and superior craftsmanship for the classic 10/22 rifle. The SSAR-22 allows the shooter to safely bump fire their 10/22 rifle from the shoulder, effectively and legally simulating fully automatic fire, and allowing for an unprecedented measure of control that is severely lacking when attempting to bump fire a rifle in the traditional, “from-the-hip” manner.

The SSAR-22 features a shelf that positions the shooter’s index finger in a fixed position in front of the rifle’s trigger. To fire, the rifle is moved forward with the support hand pushing on the forend, thereby bringing the trigger to the shooter’s finger and discharging a round. The rifle’s recoil causes it to move rearward, allowing the trigger mechanism to reset. When the right amount of constant forward pressure is applied, the rifle will continue to fire as the trigger is brought forward and depressed by the shooter’s stationary index finger, causing the gun to Bump Fire. Only 4-6 lbs. of force is required, allowing shooters of any stature to enjoy the fast paced fun of the Slide Fire 10/22. With a little practice, the shooter will be capable of delivering accurate single shots, bursts, or even full magazine dumps on demand using the SSAR-22.

The SSAR-22 employs a simple stock locking mechanism that allows shooters to select between their preferred firing methods easily and quickly. In the extended or “Open” position, the rifle’s receiver is allowed to freely slide rearward during the recoil impulse into the stock, thereby allowing the gun to be bump fired. The stock may also be locked into a collapsed, or “Closed,” position into which the buffer tube attached to the chassis is held in place within the buttstock and unable to move, thereby facilitating semi-auto function.

The SSAR-22 is designed to be compatible with the Ruger 10/22 and clones. SSAR-22 Kit includes the chassis system platform, match grade trigger assembly, SBS stock, handguard with flattop rail for optic or sight mounting, interface block, nut retainer, hex key, mounting hardware, instructions, BATFE Approval Letter, and a lifetime factory warranty. Also included is an A2 pistol grip and collapsible, M4 buttstock for converting the 10/22 to a standard M4 configuration if extended semi-auto operation is desired. Made in the USA.

Technical Information:

  • Model: SSAR-22
  • Stock Material: Reinforced High Strength Polymer
  • Compatibility: Ruger 10/22

NOTE: The Left Hand Model has a fixed finger shelf located on the right side of the stock. The trigger will be blocked by this shelf and inaccessible when fired with the right hand.

Slide Fire 1022 Buttstock SSAR-22

Ruger 10/22 Hunter X-22 Stock-Magpul

Ruger 10/22 Hunter X-22 Stock-Magpul

Ruger 10/22 Hunter X-22 Stock-Magpul

Magpul has really hit the ground in 2015 with products for the AR15, Remington 700, Glock Pistols, Ak47 and of course our much loved Ruger 10/22. The Magpul Ruger 10/22 entry comes in the for of a 2.4 pound stock called the Ruger 10/22 Hunter X-22 Stock. The Magpul Ruger 10/22 Hunter X-22 Stock is available in five colors, black, stealth gray, flat dark earth, olive drab and foliage green. The Ruger 10/22 Hunter X-22 Stock has a reversible insert that allows for standard or bull barrels.

The Magpul Hunter X-22 chassis is an ergonomic, full-featured stock for the ubiquitous Ruger 10/22 rifle. Made from high quality reinforced polymer, the Hunter X-22 features an ergonomic grip, adjustable length of pull and comb height to fit a wide variety of shooters, multiple sling mounting options, a non-slip rubber butt pad, and M-LOK slots for accessory attachment. The Hunter X-22 fits standard Ruger 10/22 .22 LR pattern rifles with no gunsmithing, and a reversible barrel tray ensures proper fit with factory pencil profile as well as heavy bull barrels. The Ruger 10/22 Hunter X-22 Stock is available for pre-order now

 Ruger 10/22 Hunter X-22 Stock Features

  • Drop-in design compatible with all factory Ruger 10/22 .22 LR receivers
  • Reinforced polymer construction for strength and durability
  • 60 degree grip angle from bore axis
  • Adjustable LOP from 12.5”-14.5” with 0.50” Spacers
  • Non-slip rubber butt-pad
  • Optional Cheek Riser Kits to raise cheek height 0.25”, 0.50”, or 0.75”
  • Reversible barrel tray accepts all factory barrels as well as aftermarket up to 0.920”
  • Compatible with all capacities of factory Ruger 10/22 magazines
  • M-LOK™ slots on forend sides and bottom for a wide variety of accessory and sling mounting options
  • Two dimpled drill points to install optional standard swivel studs
  • Push-button QD swivel compatibility in rear with optional Sling Mount Kits
  • Left and Right 1-1/4” Footman’s Loops
  • Made in U.S.A.

Ruger 10/22 Trigger Upgrades

Ruger 10/22 Triggers

There’s several good Ruger 10/22 Trigger Upgrades. Unfortunately most of them cost as much or possibly even more then the initial purchase price of the gun. In addition to the drop-in triggers listed below there’s numerous manufactures that offer upgrade parts for the existing 10/22 trigger for a more economical solution. To get an idea of what’s involved with that check out this page from Brownells.

Visit Brownells to support this web site Shop!

Timney Triggers

Timney Triggers 10/22 Drop-In Assembly

Timney Triggers 10/22 Drop-In Assembly

Timney Triggers 10/22 Drop-In Assembly

Timney Triggers’ 10/22 Drop-In Assembly contains a complete trigger assembly, cross-bolt safety, bolt catch and magazine release. The automatic bolt release allows the user to simply pull and release the charging handle to unlock the bolt, with or without the magazine inserted, and the magazine release extends from the front of the assembly to the underside of the trigger guard.

The steel trigger, sear and hammer are wire-EDM cut and heat-treated for durability. The housing is CNC-machined 6061-T6 aluminum and fits into any standard 10/22 stock. For installation, simply remove the two receiver cross pins, remove the old assembly, insert the Drop-In and then reinsert the cross pins. Trigger-pull weight is factory-set at 2 pounds, 12 ounces, with no discernible creep


Timney Triggers has just started accepting preorders of their new drop-in trigger for the Ruger 10-22. “EDM cut, Teflon-Nickel coated, exceptionally smooth, crisp, single-stage, drop-in trigger. Pull weight 2.5 pounds.

Ruger 10/22 2.5 Pound Timney Trigger

KID Ruger 10/22 Two-stage Trigger

The KID trigger offers the incredibly clean and consistent let off expected in a target trigger while maintaining the total reliability and safety required of a field trigger. The pull weight can be infinitely distributed between the two stages offering a pull as light as 6 ounces (3 ounces on the first stage and 6 ounces on the second stage) or as heavy as 2.5 pounds.

KID Two-stage Trigger for the ruger 10/22

Volquartsen Trigger Guard 2000

This complete Trigger Assembly is CNC machined from aircraft aluminum and equipped with precision EDM parts. It features an internal pre-travel adjustment and a hammer that is precision ground from 440C stainless steel and hardened to 58 RC. The sear and disconnector are made of A2 hardened tool steel with tolerances of +/- .0002″, complete with custom tuned springs. The trigger is black anodized, equipped with an over travel adjustment screw and is reset internally to eliminate any dragging or inconsistencies caused by a conventional trigger plunger. An automatic bolt release and an extended magazine release are also included. Trigger pull is pre-set to 2 to 2-1/2 lbs. Due to the oversized safety used, it may be necessary for some stocks to be modified slightly to accommodate this part.

Volquartson Trigger Guard 2000

Jard Ruger 10/22 Trigger

Machined, aluminum, trigger housing with hardened, steel components replaces the non-adjustable, factory trigger in your Ruger 10/22 for a crisp, consistent, single stage trigger pull worthy of the finest match rifle. Patented, two-lever system puts the sear engagement point at the backside of the hammer for improved leverage that lightens pull weight to approximately 1.5 or 2.5 pounds, depending on model. Extra-power hammer spring ensures fast, positive primer ignition. Adjustments for sear engagement and overtravel allow precise tuning to eliminate creep. Includes pivoting ejector, magazine latch, and push-button safety. Spring-loaded, bolt lock lever disengages automatically when bolt is pulled rearward for easy, one-handed bolt operation. Available in black or silver. Drop-in installation using the factory, receiver cross-pins.

Jard Ruger 10/22 Trigger System

Hornet Custom Ruger 10/22 Trigger

The best selling custom trigger assembly upgrade for your Ruger 10/22. If you have been dissatisfied with the 6-8 pound trigger pull that came with your rifle, this customized trigger assembly may be perfect for hunting & off-hand target shooting. The crisp trigger release is only 2-3/4 pounds. Each trigger assembly has been carefully fitted, lubricated, and tested for safety and reliability. What makes it special are the custom replacement parts included in the assembly. Standard trigger and housing color is black. Best application: Hunting & off-hand target shooting.

Easy drop-in installation. No special tools needed. Instructions included. After the stock is removed, two cross-pins attach the assembly to the receiver. Drift them out, drop the old assembly, and reassemble in reverse order. It can be done in less than 5 minutes without experience.

Hand polished and honed Hammer for a light, smooth, trigger release. Lightweight Trigger Return Spring and Custom Radius Trigger Return Plunger polished for smoothness. Custom Sear and Disconnector honed for minimal positive engagement consistent with safety. Automatic Bolt Release eliminating two-hand operation – just pull back and release. Custom Extended Magazine Release – push forward and the magazine easily drops away – no more convoluted pinching to operate the release. Custom hammer, sear, and disconnector pins to eliminate most of the trigger play. Satin black polymer housing, red trigger, red extended magazine release. All parts are fitted, lubricated, and test fired.

Hornet Custom Ruger 10/22 Trigger

Under Construction

Please dont mind the appearance while we upgrade to a mobile friendly platform featuring the latest content.

TandemKross Ruger 10/22 Ruger Mark Pistol Parts


Ruger 10/22 Magazine Doubler - TandemKross Ruger 10/22 Ruger Mark Pistol Parts

Ruger 10/22 Magazine Doubler

TandemKross Ruger 10/22 Ruger Mark Pistol Parts

I recently became of a company called Tandemkross that specializes in aftermarket parts for the Ruger 10/22, Ruger 22/45, Ruger Mark II Ruger Mark III and Keltec PMR Pistols. Tandemkross offers some pretty neat products. The first such product to catch my eye is the  Ruger 10/22 Mag Doubler. The Ruger 10/22 Magazine Doubler connects two 10 round magazines together at the base. It is the cleanest implementation of the concept I have seen to date. For more info on Tandemkross visit their website.

  • Allows 2 10/22 Rotary Magazines from Ruger to be “double” stacked
  • Easy to install. Does not modify the magazines in any way
  • Durable plastic design for years of service

KIDD INNOVATIVE DESIGN 10 22 Match Bull Barrel

KIDD INNOVATIVE DESIGN 10 22 Match Bull Barrel

KIDD INNOVATIVE DESIGN 10/22 Match Bull Barrel

KIDD INNOVATIVE DESIGN 10/22 Match Bull Barrel


KIDD INNOVATIVE DESIGN 10 22 Match Bull Barrel

I recently purchased a KIDD INNOVATIVE DESIGN Bull Barrel from a close friend for an incredible price. He had purchased the KIDD INNOVATIVE DESIGN 10 22 Match Bull Barrel as an upgrade for his Ruger 10/22 but unfortunately the barrel weight was more than his kids could handle. Basically they struggled through one loaded magazine and that was it. To my eyes the KIDD INNOVATIVE DESIGN 10 22 Match Bull Barrel appears unused.

Acquiring this barrel  causes yet another project to go unfinished while another comes to life.  My friends point about barrel weight is valid so I decided that addressing the weight might be an interesting project in itself. I have a few idea but I will not spill the beans at this time. You will just have to keep checking back.

The image of the KIDD INNOVATIVE DESIGN 10 22 Match Bull Barrel at the top of the page is from the KIDD website. I will shoot my own very soon for a little before and after comparison.


KIDD INNOVATIVE DESIGN 10 22 Match Bull Barrel Description:

We believe these are the finest barrels on the market, each one is hand lapped. Our stainless steel barrel is bored and rifled by Lothar Walther in Germany. Tony Kidd then performs all the final machining to make our match barrel a worthy KIDD product. A proprietary chamber reamer is used to ensure the cartridge and bullet feed smoothly while allowing the bullet to consistently engrave the rifling .020″.    Our barrels are chambered to accept .22 ammo (not long enough for stingers) and have a 1:16 twist.  The unique convex extractor slot eliminates extraction problems by ensuring the extractor is always in perfect alignment with the case rim. Why doesn’t everybody use this extractor slot? Because the tooling is very expensive and requires tolerances be held very close for proper machining. Each barrel receives an 11 degree crown and the double ring logo at the muzzle.  Our 20″ bull barrel weighs 3.5 lbs, 18″ weighs 3.3 lbs, and our 16.5″ weighs 3.1lbs.
We can offer such a great price on this barrel because we don’t sell to distributors, only retail and dealer pricing is offered, therefore we don’t have to increase our price to compensate for 3 tier pricing. There are cheaper barrels out there but as with all KIDD products, “you get what you pay for.” To avoid “barrel droop,” check your clamp to make sure you only have moderate tension on the screws. We tighten them to around 10 inch pounds which is just snug enough to keep the barrel from moving forward. No more than this, as even the slightest tension moves the barrel and receiver out of alignment.

Barrel installation: Depending on your receiver, if there is paint build up in the receiver where the barrel extension is inserted, be sure to scrape that out. If the barrel is tight, use an anti-seize compound to assist in installation. It is best if you can get the barrel started, then turn it over and tap the back of the receiver with a rubber mallet. Be sure to line the extractor slot up as you are installing the barrel. Your barrel is ready to shoot, just run two magazines through it before you really start looking at group size. Do this each time you change brands of ammunition as well. Keep the chamber clean, but don’t clean the bore too much you will decrease accuracy. Depending on the ammo, clean the bore around every 500 rounds.

Buy Ruger 10/22 Magazines Now

Buy Ruger 10/22 Magazines

Translucent Ruger 10/22 Magazine, Buy Ruger 10/22 Magazines

Translucent Ruger 10/22 Magazine

If you need to Buy Ruger 10/22 Magazines Impact Guns just announced you can buy  Ruger 10/22 magazines at this very moment from the Impact Guns website.  Click here to order yours as they are certain to go out of stock quickly. These genuine factory Ruger 10/22 magazines are the 40th anniversary 10 round clear variety part#  BX-1-40. If you miss this opportunity I suggest keeping an eye on the Brownells and Ruger websites.

I never thought I would see the day where the availability of 10 round Ruger 10/22 magazines would be noteworthy. My how times have changed for the worst.

Kidd Innovative Design 10/22

Kidd Innovative Design 10/22

Kidd Innovative Design 10/22

This past Christmas as a gift I received a Tactical Solutions Vantage 10/22 Stock in Crimson Red. While a little unexpected and unplanned for I was pleasantly surprised by this beautiful and thoughtful gift. The timing was perfect. I had been in the process of gathering parts for another 10/22 project for this site but I was not very far along in the process and the new stock allowed me to fast-track another brand new project. You see back in the fall, early September if I recall correctly I happened on to a website from a company called  Kidd Innovative Design.  My initial impression of the website was that Kidd Innovative Design offered premium 10/22 part’s that could be used to assemble possibly the finest 10/22’s. To say I was interested is an understatement. I then set out to research Kidd Innovative Design’s products on the various rimfire forums. By all reports there were no finer 10/22 parts. That was all I needed the bug was planted.

Kidd Innovative Design 10/22 Parts

Kidd Innovative Design 10/22 Parts

Fast forward to January I decided to put off the other 10/22 project and order a KIDD Classic Receiver for examination purposes before taking the full plunge. Much to my surprise the receiver arrived at my FFL in a few days. It was apparent that the KIDD Classic Receiver was beautifully machined and finished inside and out. A few days later I ordered the remainder of the parts to complete the project. Three days later USPS delivered a little box of joy. Kidd Innovative Design’s attention to detail is evident in their packaging and shipping. There is absolutely no risk of of anything getting dinged or scuffed. Midway can learn a few things from these folks.

The trigger assembly, barrel and bolt are machined and finished just as well as the Classic Receiver. Every single surface and fit speaks of quality and precision. This is quality I simply do not typically see on firearms other than 1911’a that cost thousands of dollars more. To say I was impressed is an understatement.

I spent about an hour that evening assembling the 10/22 rifle seen at the top of the page. Assembly was not quite as easy as assembling an AR15 but still pretty easy. Kidd Innovative Design includes all the hex key wrenches required except for the barrel v-block.

Note: Being manufactured to tight tolerances special care needs to be taken when installing the barrel

I like to test customer service before I recommend anything. I think it’s important for folks to know up front what to expect. Kidd Innovative Design’s customer service is every bit as good as their products. Each email was responded to very quickly with thorough and helpful information. Even an offer to install the barrel into the receiver for me if I was having trouble. What more could I ask for?  Superior product with matching support. Kudo’s to Kidd Innovative Design.

Only one question remains. For the next project do I go with a fluted barrel and a two stage trigger?

Over the next few weeks I will get a suppressor and optics mounted and if the weather co-operates some range time. I will throw together a dedicated page to this product in my typical style of part by part explanation with pictures.

Stay tuned.







Optimization WordPress Plugins & Solutions by W3 EDGE